DX-1100 Primer for Concrete – Gallon Kit

DX-1100 Directions
Clean surface removing all dirt, dust, oil and all other contaminants. 

Preparation recommendations
Pressure wash, grinder, wire wheel, sandblast

Concrete Surfaces:  Concrete must be cured a minimum of 7 days at 75°F (24°C) and 50% relative humidity or equivalent. Prepare surfaces in accordance with ASTM D4258 surface Cleaning of Concrete and ASTM D4259 Abrading Concrete. Voids in concrete may require surfacing. Mortar joints should be cured a minimum of 15 days.

Mixing
Power mix part A resin separately, then add part B hardener and power mix.   Pay attention to the sides and bottom of the bucket and mix to obtain a uniform color.

Application
Once mixed be ready to apply. Do not keep the blended coating in the original container unless immediate use is planned.  Otherwise, exothermic heat created during the curing process will considerably shorten the pot life.  Pour the coating into a rolling tray or pour directly onto the surface.  Try to keep the depth of the coating in the tray below 3/8”.                                            

Brush:  Use a medium bristle brush.                                                                                                    

Roller:  Use a short-nap synthetic roller cover with phenolic core.

Spray Application:  Refer to the Product Data PDF.  

Cleanup
Use MEK or Acetone. In case of spillage, absorb and dispose of in accordance with local, applicable regulations.

Safety
Refer to the SDS PDF               

*See Product Data PDF for more complete detail.

DX-1100 Part B SDS